Testimonials From Editors



Venmark International has a keen understanding of what editors are looking for. Our reputation for providing credible information about our clients' products and services is impeccable. But don't take our word for it, here's what editors say...


"I was finally able to run EASTPRINT as a 5-Star product. Thanks again for sending in your material. I know that you work very hard to send out all those releases. Only wish I could feature each and every one."

- Mike Foley, Editor


  Designfax

"Thank you for your contribution to this issue's editorial! And thank you for all your help gathering materials for the Sphinx Adsorbents' editorial (pgs. 59-60). Your time and effort helped make this issue a success! Thanks again."

- Carrie Loudon, Assistant Editor


  Tablets & Capsules Magazine

"Thanks, Linda. And let me just tell you that Norcross press releases are among the best-written releases I receive from ANY company out there. "

- Brian E. Hayes, Managing Editor


  Adhesives & Sealants Industry

"I appreciate the format in which Venmark submits news releases to Chemical Equipment Magazine. I've been receiving new product information from your agency for over 20 years. The releases are always well written, concise, a good length, and accompanied by excellent photography. I wish everyone submitted their information in the "Venmark" format! I was talking to another editor here at Reed Business Information earlier this week and he, too, agreed you're one of, if not the best PR firm around these days. Keep up the good work! It's a pleasure working with you and the material you submit to our magazines."

- Geoff Bridgman, Editor-in-Chief


  Chemical Equipment Magazine

“In short, when I see the characteristic “editor-friendly” Venmark press release, I know it is worthwhile for me to read it because I know it contains information that I cannot afford to ignore. The now familiar format means I know exactly where to look for the information I need. That makes my life easier.”

- Russell L Kratowicz, P.E., Senior Editor


  Plant Services Magazine

"Since I've worked both sides of the desk, I have always been impressed with the News I get from "Venmark". To me it stands out above all the rest as the way I would do it if I were sending the stuff out. So then I went a step further and asked all of our Editors what they think of the material they get from "Venmark". The answer was absolutely unanimous, "It's that best stuff we get, consistently!"

- Ronald Hill, Editorial Director


  Gordon Publications, Inc.

"It's rare that I write a letter like this; but, I wanted to tell you what a fine job you do representing your clients' and their new products. The news releases prepared by Venmark, written in a direct, "no-fluff" manner, printed on their bright yellow paper, and accompanied by an outstanding photograph of the product, ALWAYS catch my attention."

- D. Keith Patrick, Editor


  Industrial Heating Magazine

"Your staff, without exception, produces the best new product releases that we receive. Unlike the hundreds of releases that cross my desk each week, yours are well-written, to-the-point, understandable, and, most important of all, show your clients' to their best advantage. I hope they realize the positive service you give them."

- Stanley Parkhill, Editor


  Compressed Air Magazine

"Perhaps you can use this situation to make a point to your client regarding what can be done by producing a gorgeous photo of a fundamentally plain product."

- Merle Snyder, Editor


  Plastics Auxiliaries & Machinery

"I regularly receive press releases from Venmark International, and have noticed that the photos supplied with them are colourful and often visually stunning! As Assistant Editor of Medical Device Technology, I am looking to improve our photo library. I was wondering, therefore if you would be interested in submitting a selection of your clients' artwork to be considered for the purpose of illustrating articles in the magazine. If a photograph is used a credit to the company will be included. Please feel free to contact me if you have any questions. I look forward to hearing from you."

- Carla Vincent, Assistant Editor


  Medical Device Technology

"Finally!! I've been trying to position this great product since last April. We've had good comment -- seems like everyone wanted one and could have used it."

- Glenn Boundy, Jr., Assistant Editor


  Southern Boating Magazine

"Your news releases are first class—concise, factual and literate. Your photographer knows his business too. His shots are gorgeous."

- Rick Darby, Assistant Editor


  Aviation Mechanics Bulletin

"I just wanted to say that your shop sends us some of the best-presented industrial product information we see---and we see a lot. Sincere compliments on Venmark’s high-quality work."

- Paul Lazarus, Editor


  Professional BoatBuilder Magazine

"You guys do a good job. Whenever I get a release from you I know that it will have the info I need --- something I cannot say about some of your peers."

- Mark Marselli, Editor


  Wire Journal International

"Wonderful --- Thank you for your continued interest!"

- Lisa Arrigo, Editor


  Product Design & Development

"Excellent, keep it up! Do you generate case studies of Canadian customers?"

- Mike Edwards, Editor


  Design Product News

"Thanks for the well-written pieces and excellent images. We frequently cover your clients."

- Kimberly Chapple, Editor


  Designfax and Medical Equipment Designer Magazine

"As an editor, I want to express my appreciation for the quality and professionalism of the material that you send out. Most editors don't have time to rewrite bad material. Yours needs virtually nothing more than type specifications. Again, thanks."

- Harold R. Daniels, Editor


  Metal Stamping Magazine

“It is rare that someone goes so completely out of their way to help us shoot a story as you have done. Believe that it is appreciated and I hope to work with you and your organization again someday.”

- Rosemary Freitas, Production Coordinator


  WNEV-TV Channel 7

“I would like to take this opportunity to say one thing: Your press releases are the best-written of the hundreds and hundreds that we receive weekly. Continued good luck on your enterprise."

- Ken Lilienthal, Editor-in-Chief


  Industrial Product Bulletin

“It’s nice to know that someone’s thinking of making our editorial balancing act easier. Keep up the good work.”

- Elizabeth G. Berglund, Editor


  American Printer

“Good afternoon, I enjoy receiving your press releases, and in particular your release entitled “Electronic truck scale features modular pitless design”. I plan on using it in our publication; the enclosed color photo was the clincher.”

- Jane Plout, Editor


  Milk & Liquid Food Transporter

"I have recently read of your client’s activities, which I know will be of great interest to our readers in 128 countries. Published since 1934, Wire Industry is the highest circulation monthly serving the wire, cable, and wire products industries worldwide. I look forward to hearing from you and to helping publicize your company’s activities through the editorial pages."

- Adam Shulman, Editor


  Wire Industry Magazine

"Congratulations! Your release appeared in MetalForming Magazine. Attached is a tear sheet of the item that ran in the current issue. It is important that our readers learn what is going on in the metalforming industry. Metalforming magazine welcomes your releases and any other story ideas. If there is anything else I can do, please call."

- Marlene O’Brien, Editorial Manager


  MetalForming Magazine

"I am pleased to inform you that your company’s product has been selected for an encore presentation in Medical Device & Diagnostic Industry’s annual Reader’s Choice feature. The winners of MD&DI’s Reader’s Choice award are the top 20 most-requested products and services that appeared in the magazine during the last year."

- Steve Baeck, Associate Editor


  Medical Device & Diagnostic Industry

"I would very much like to feature your product in our magazines at it would be of great interest to our readers. Let me know if you want to market your product in the UK, I could probably find a distributor for you."

- Alan Goodsell, Editor


  The Router Magazine

"Congratulations! Your product was featured in Do-It-Yourself Retailing’s New Product Showcase. This means that your new product had the opportunity to be seen by over 66,000 do-it-yourself retailers!"

- Bill Lee, Director of Marketing


  Do-It-Yourself Retailing